E46 series BMW 3

since 1998 of release

Repair and car operation



E46 series BMW 3
+ BMW 3 Cars (Е46)
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
- Power supply systems, injection and release
   Security measures and rules of observance of purity at work with fuel system
   Removal and installation of the sensor of a stock of fuel / fuel pump
   Check of the sensor of a stock of fuel
   + Power supply system of petrol engines
   + System of injection of fuel of the petrol engine
   + Power supply system of diesel engines
   + System of production of the fulfilled gases
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes



2d97642e


Check of the sensor of a stock of fuel

In the course of decrease in level of fuel in a tank the float in the stock sensor falls also. Thus resistance of the sensor having sliding contact at the same time decreases. The microprocessor in the dashboard block proceeding from resistance of the sensor and other data calculates fuel level in a tank and deduces data on the dashboard. Both sensors are checked equally.

The fuel pump in the right sensor of a stock can be checked only on HUNDRED.


 CHECK

1 Remove the sensor.
2 Attach an ohmmeter to plugs of the tip of the sensor of a stock.
3 Keep the sensor in working situation. Thus the float is below and the indicator on the panel shows “A fuel reserve”. Demanded value of resistance: 70 ± 2 Ohm.
4 Turn the sensor on a corner 180 ° (put it on the head), thus the float is above. The indicator on the panel shows "full".

Demanded value:
right sensor 402 ± 6 Ohm
left sensor 362 ± 6 Ohm
5 if necessary replace in a set the damaged sensor of a stock.

Sensors are delivered only in a set, separate details cannot be replaced.