E46 series BMW 3

since 1998 of release

Repair and car operation



E46 series BMW 3
+ BMW 3 Cars (Е46)
+ Current leaving and service
- Engine
   - Procedures of repair of the engine
      Removal and installation of the bottom cover of an impellent compartment
      Removal and installation of a box of an air inlet
      Compression check
      Removal and installation of the inlet pipeline
      Removal and head installation cylinders / replacement of sealing laying
      Removal and installation of camshafts
      Removal and installation of the vacuum pump
      Removal, installation and tension of a maple belt
   + System of greasing of the engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes



2d97642e


Removal and installation of a box of an air inlet

The box of an air inlet is necessary for removing, if it is required to uncover heads of cylinders or the inlet pipeline.

 REMOVAL

1 Remove an element of the air filter of ventilation of salon, a heater and the conditioner.

2 Open the cable channel at the lower part of an airmodular box-2-and take out cables.

3 Turn out bolts-1-and remove the lower part of an airmodular box-2-.


 INSTALLATION

1 Fix bolts the lower part of an airmodular box.
2 Enclose cables to the cable canal at the lower part of an airmodular box. Fix the cable channel.
3 Establish filtering element of a heater and the conditioner, address to the Section Replacement of an element of the filter of air of salon.