E46 series BMW 3

since 1998 of release

Repair and car operation



E46 series BMW 3
- BMW 3 cars (Е46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and workplace equipment
   Poddomkrachivaniye and towage
   Engine start from the auxiliary power supply
   Checks of readiness of the car to operation
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Governing bodies and operation receptions
   Governing bodies and devices
   Filling
   Keys, uniform lock and anticreeping system
   Security сигнализация*
   Window regulators
   The hatch with elevating and movable крышкой*
   Seats
   Adjustment of provision of a steering wheel
   Mirrors
   Safety systems
   Lock of ignition and engine start
   Parking brake
   Manual box of gear shifting (RKPP)
   Automatic transmission (AT) *
   Lever of the switch of indexes of turn / light signal
   Screen wipers and stekloomyvatel
   Heater of back glass
   Tempostat (automatic equipment of maintenance of the set speed) *
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilization of stability with a regulator of a torque of the ASC+T/engine System of dynamic control of stability of DSC*
   The monitoring system of pressure of air in tires (RDC) *
   Lighting and light devices
   Heater, ventilation and conditioner of air of salon
   Salon equipment
   Running in
   Features of driving of the car
   Catalytic converter
   Anti-blocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage compartments
   Automobile телефон*
   Readjustment of headlights
   Cowl
   Unlocking of a cover of the refueling hatch manually
   Drive of an elevating and movable cover of the hatch вручную*
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes



2d97642e


Mirrors

 


External rear-view mirrors

1 Switch for adjustment of provision of a mirror in four directions.
2 Switch from one mirror on another.
3 Klavisha* for data and cultivation of mirrors.

As a result of pressing a key of a mirror nestle on a body or get divorced in the parties that is convenient at journey through a sink, at movement on narrow streets, and also for return of mirrors to a starting position if they were earlier casually displaced forward.

To press mirrors to a body it is possible, only if speed of the car does not exceed 10 km/h.

The provision of mirrors can be regulated and manually, turning them for a fringing of glasses.

External, асферически изогнутая* the part of a reflecting surface provides at some distortion of the image bigger sector of the review in comparison with internal, выпуклой* a part the corner of the back review as a result increases and the so-called "dead" zone is reduced.

The distant mirror from the driver has more convex reflective surface in comparison with a mirror on a door of the driver. Subjects seen in it seem more remote, than actually. Therefore it is only conditionally suitable for a distance assessment to moving vehicles.

The told belongs and to external асферически the bent part of a mirror.

Электрообогрев*


The heating of both mirrors is carried out automatically depending on air temperature at ignition key turn in situation 2.

Rear-view mirror in salon

For reduction of blinding action of headlights going behind cars it is necessary to turn forward a small rychazhok.


Cosmetic mirrors with подсветкой*

To use a mirror, cast away a sun-protection peak down and if the mirror is closed, shift its cover aside.

Illumination of mirrors joins already at ignition key installation in situation 1.

Sun-protection peaks


It is possible not only to throw back peaks down, but also to take aside to lateral glasses.

No-glare (automatically blacked out) mirror back вида* in salon

Reflective ability of a mirror automatically smoothly decreases depending on brightness of the general lighting and blinding action of headlights going behind cars.

The mirror reduces blinding influence of headlights moving behind cars, depending on its intensity, and at its termination - restores initial level of the reflective ability. The light sensor directed forward measures intensity of light in the case of a mirror in front of the car. The second light sensor is in the mirror. The electronic system of adjustment compares values of intensity of light in front and behind.


The difference of values is defining size for change of electric tension on a jellylike layer of a mirror.

This layer reacts to change of tension and provides smooth blackout of a mirror.

Thus, need most disappears to regulate extent of blackout of a mirror that allows the driver to concentrate the attention to the road completely.

At inclusion of transfer of a backing or at transfer of a control lever of AT to situation R the mirror is automatically switched to a mode of complete reflection without blackout.

For normal work of a mirror it is important to cover and keep nothing clean its photo cells. One photo cell (it is shown by an arrow) is in a mirror, and another - on its reverse side.

Address also to the Section an interior Mirror with automatic blackout.