E46 series BMW 3

since 1998 of release

Repair and car operation



E46 series BMW 3
- BMW 3 cars (Е46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and workplace equipment
   Poddomkrachivaniye and towage
   Engine start from the auxiliary power supply
   Checks of readiness of the car to operation
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Governing bodies and operation receptions
   Governing bodies and devices
   Filling
   Keys, uniform lock and anticreeping system
   Security сигнализация*
   Window regulators
   The hatch with elevating and movable крышкой*
   Seats
   Adjustment of provision of a steering wheel
   Mirrors
   Safety systems
   Lock of ignition and engine start
   Parking brake
   Manual box of gear shifting (RKPP)
   Automatic transmission (AT) *
   Lever of the switch of indexes of turn / light signal
   Screen wipers and stekloomyvatel
   Heater of back glass
   Tempostat (automatic equipment of maintenance of the set speed) *
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilization of stability with a regulator of a torque of the ASC+T/engine System of dynamic control of stability of DSC*
   The monitoring system of pressure of air in tires (RDC) *
   Lighting and light devices
   Heater, ventilation and conditioner of air of salon
   Salon equipment
   Running in
   Features of driving of the car
   Catalytic converter
   Anti-blocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage compartments
   Automobile телефон*
   Readjustment of headlights
   Cowl
   Unlocking of a cover of the refueling hatch manually
   Drive of an elevating and movable cover of the hatch вручную*
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes



2d97642e


Seats

When developing seats the most modern methods were used.

The strengthened bearing design of seats provides together with seat belts, limiters and natyazhitel of belts and, certainly, inflatable pillows the highest level of safety. Thanks to multilayered structure of a filler of ergonomic seats, high percentage of natural fibers and difficult internal system of ventilation of a seat, people during movement - and even on long trips - feels it is weakened and is not tired. The lumbar support provides optimum position of a backbone.

Adjustment of seats

For the sake of your personal security observe the following rules of adjustment of seats.

Do not regulate a seat of the driver under way. Its unexpected shift can cause control loss over the car and lead to failure.

The seat belt should as it is possible to adjoin to a body more densely. Otherwise at head-on collisions the zone belt can come off up on hips and injure the lower part of a stomach. Besides at leaky adjacent belt its holding effect is realized with delay.

It is inadmissible, that during car movement the back of a forward seat was rejected far back (it concerns first of all a passenger seat) as thus in case of failure there is a danger of "vyskalzyvaniye" of the person under a seat belt which cannot execute the protective function.

Seat with manual adjustment

 


1 Longitudinal adjustment

Having pulled for the handle, shift a seat in situation convenient for.
Having released the handle, slightly shake a seat forward-back that it reliably stopped.

2 Adjustment on height

Having pulled for the handle, adjust seat height, loading a pillow with a body weight or standing up from it.

 


3 Adjustment of a back

Having pulled for the handle, adjust a back inclination, leaning back on it or moving forward.

Correct landing

For unloading of vertebral disks sit down with the maximum shift back, leaning all back on a seat back. Ideal the pose at which the head settles down on one straight line with a backbone is considered.

To reduce tension of muscles at distant trips, it is possible to increase a back inclination some. Thus driving possibility when lying on the highest point of a wheel of a hand are slightly bent in elbows, however, should remain.

After adjustment of a seat make seat belt adjustment on height, address to the Section of System of safety.

Head restraints

Adjustment

Head restraints can be regulated on height, extending them from nests or pushing back.

For transfer of head restraints to the lowermost situation press the button 1.

The inclination of head restraints of forward seats can be regulated turn round a horizontal axis.

Head restraints weaken traumatic consequences of failures for cervical vertebras.

The middle of head restraints should settle down approximately at level of ears.


Removal

Extend a head restraint against the stop up.

Press the button (it is shown by an arrow) and remove a head restraint.


Installation

Press the button (it is shown by an arrow) and insert a head restraint into the directing.

Adjust the provision of a head restraint.

Firm seat sports типа*

This seat has an additional possibility of adjustment of a tilt angle of a pillow and a popliteal support.

1 Inclination up:
Pull for the handle up several times while the pillow of a seat will not occupy situation convenient for you.

2 Inclination down:
Press the handle several times while the pillow of a seat will not occupy situation convenient for you.

3 Popliteal support:
Having pulled for the handle bring a popliteal support into situation convenient for you.


Lumbar опора*

The contour of a back can change so that its acting part was entered in a hollow of lumbar department of a backbone, creating a support for it.

Thus, the support of the top department of a basin and a backbone, promoting the correct and free landing is provided.

The pressing the switch in front or behind reaches respectively increase or reduction of camber of a contour of a back.

By pressing the top or lower part of the switch camber of the top or lower part of a lumbar support increases.


Seat with the adjustment electric drive положения*

1 Longitudinal adjustment of a seat.
2 Adjustment of a seat on height.
3 Adjustment of an inclination of a back.

Adjustment of a head restraint is made manually.

For the sake of your personal security observe instructions on the adjustment, given above in this Section.


Firm seat of sports type

1 Adjustment of a tilt angle of a pillow.
2 Longitudinal adjustment of a seat.
3 Adjustment of a seat on height.
4 Adjustment of an inclination of a back.

Adjustment of a head restraint and popliteal support is made manually.

For the sake of your safety observe instructions on the adjustment, given above in this Section.


Memory of adjustments сиденья*

Storing and reproduction to three options of adjustment of a seat is possible.

The device does not remember the provision of a lumbar support.


Storing

1 Having inserted a key into the ignition lock, turn it in situation 1 or 2.
2 Adjust a seat, having established it in situation convenient for.
3 Press the Memory key ("Memory"). The control lamp built in in it thus will light up.
4 Press at discretion a key 1, 2 or 3. Thus the control lamp will go out.

Reproduction

The ignition key in situation 1:

Press, without holding, the necessary key (1, 2 or 3).

At impact on any switch of adjustment of a seat or by pressing one of memory keys process of installation will immediately interrupt.
The door of the driver is closed, and a key in the lock of ignition will turn in situation 0 or 2 or in general will take out from it:

(1, 2 or 3) it is necessary to hold the necessary key pressed to complete completion of process of installation.

Having casually pressed the MEMORY key, press it once again that the control lamp went out.

Do not include reproduction function during movement as unexpected shift of a seat can become a cause of accident.

# you can to adjust so the car that at its unlocking by means of remote control of your personal key the seat will automatically occupy situation convenient for you.

If the memory block in a key is used, before unlocking of the car be convinced that space behind a seat of the driver freely. Otherwise at seat shift damage of the subjects which were on a floor back is possible.