E46 series BMW 3

since 1998 of release

Repair and car operation



E46 series BMW 3
- BMW 3 cars (Е46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and workplace equipment
   Poddomkrachivaniye and towage
   Engine start from the auxiliary power supply
   Checks of readiness of the car to operation
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Governing bodies and operation receptions
   Governing bodies and devices
   Filling
   Keys, uniform lock and anticreeping system
   Security сигнализация*
   Window regulators
   The hatch with elevating and movable крышкой*
   Seats
   Adjustment of provision of a steering wheel
   Mirrors
   Safety systems
   Lock of ignition and engine start
   Parking brake
   Manual box of gear shifting (RKPP)
   Automatic transmission (AT) *
   Lever of the switch of indexes of turn / light signal
   Screen wipers and stekloomyvatel
   Heater of back glass
   Tempostat (automatic equipment of maintenance of the set speed) *
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilization of stability with a regulator of a torque of the ASC+T/engine System of dynamic control of stability of DSC*
   The monitoring system of pressure of air in tires (RDC) *
   Lighting and light devices
   Heater, ventilation and conditioner of air of salon
   Salon equipment
   Running in
   Features of driving of the car
   Catalytic converter
   Anti-blocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage compartments
   Automobile телефон*
   Readjustment of headlights
   Cowl
   Unlocking of a cover of the refueling hatch manually
   Drive of an elevating and movable cover of the hatch вручную*
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes



2d97642e


Tempostat (automatic equipment of maintenance of the set speed) *

 

Tempostat allows to remember and automatically to support demanded speed at level not below 30 km/h.

Inclusion темпостата


Tempostat can be included after ignition key turn in situation 1. Press the button 1. Thus on a control panel the control lamp will light up.
You can use the tempostaty.

Movement with the set speed, storing of speed and dispersal


Press the button 2.

The actual speed of movement which will be supported by a constant is entered into memory темпостата. In each subsequent pressing of the button speed will increase by 1 km/h.

If to hold the button 2 in the pressed situation, the car will be dispersed without impact on an accelerator pedal. If to release the button, the speed reached to this moment remains in memory and will be supported at this level.

Delay


Press the button 3.

If before movement already occurred in a mode of maintenance of the set speed, by each pressing of the button speed will decrease by 1 km/h.

If to hold the button 3 in the pressed situation, at movement in a mode of maintenance of the set speed extent of opening of a butterfly valve automatically will decrease and movement will be slowed down. If to release the button, the speed reached to this moment remains in memory and will be supported at this level.

Work interruption темпостата


At included темпостате press the button 1. The control lamp continues to burn. If necessary you can use again the tempostaty.

Besides, work темпостата automatically interrupts in the following cases:

- When braking.
- At switching off of coupling or when translating the lever of the AT selector from situation D in situation N.
- For BMW 318i, 320i, 323i, 328i: if the set speed is exceeded throughout more than 30 with and more than on 16 km/h.
- For BMW 320d: if the set speed is exceeded throughout more than 30 with and more than on 16 km/h or decreases more than by 20 km/h.

Call of speed from memory


Press the button 4.

There will be a call of last of the entered values of speed to which it at first will be finished, and then will begin to be supported at the set level. With ignition key turn in situation 0 темпостат it will be switched off, and the entered value of speed will be erased.

Switching off темпостата


Having interrupted work темпостата, once again press the button 1. The control lamp will go out, and the value of speed kept in memory will be erased.

To use tempostaty it is impossible, if the route abounds with turns or if the increased intensity of movement does not allow to move evenly, and also on slippery (because of snow, a rain, ice) the road or weak (gravel, sand) soil.

If at movement under a bias of brake effect of the engine it is not enough, the set speed can be exceeded. On liftings its reduction if engine capacities do not suffice is possible.