E46 series BMW 3

since 1998 of release

Repair and car operation



E46 series BMW 3
- BMW 3 cars (Е46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and workplace equipment
   Poddomkrachivaniye and towage
   Engine start from the auxiliary power supply
   Checks of readiness of the car to operation
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Governing bodies and operation receptions
   Governing bodies and devices
   Filling
   Keys, uniform lock and anticreeping system
   Security сигнализация*
   Window regulators
   The hatch with elevating and movable крышкой*
   Seats
   Adjustment of provision of a steering wheel
   Mirrors
   Safety systems
   Lock of ignition and engine start
   Parking brake
   Manual box of gear shifting (RKPP)
   Automatic transmission (AT) *
   Lever of the switch of indexes of turn / light signal
   Screen wipers and stekloomyvatel
   Heater of back glass
   Tempostat (automatic equipment of maintenance of the set speed) *
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilization of stability with a regulator of a torque of the ASC+T/engine System of dynamic control of stability of DSC*
   The monitoring system of pressure of air in tires (RDC) *
   Lighting and light devices
   Heater, ventilation and conditioner of air of salon
   Salon equipment
   Running in
   Features of driving of the car
   Catalytic converter
   Anti-blocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage compartments
   Automobile телефон*
   Readjustment of headlights
   Cowl
   Unlocking of a cover of the refueling hatch manually
   Drive of an elevating and movable cover of the hatch вручную*
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes



2d97642e


Screen wipers and stekloomyvatel

 


0 Starting position (screen wipers do not work).

1 Work of screen wipers in interval the intensity mode / sensor дождя*.

2 Work of screen wipers with normal rate.

3 Work of screen wipers with the increased frequency.

4 Single inclusion of screen wipers.

5 Work of stekloomyvatel in an automatic mode.

6 Regulator of an interval of inclusion of screen wipers at work in interval mode / sensitivity of the sensor of intensity of a rain.

1 Interval mode or intensity sensor дождя*


Interval mode


The interval between inclusions can be regulated in steps by the corrugated castor 6 having four situation. In addition the interval of inclusion is automatically regulated depending on the actual speed of movement.

Sensor of intensity of a rain

The sensor allows to regulate automatically frequency of work of screen wipers depending on intensity of a rain or snowfall. It means that at the switched-on sensor you should not care of inclusion any more both switching off of screen wipers and switching from one mode of their work on another. You can concentrate the attention to the road completely. It is especially important under bad weather conditions and promotes bigger traffic safety and increase of convenience of driving.

If screen wipers are included on an interval operating mode, they react at once, if, for example, on a windscreen of your car water from under wheels ahead of the going car got.

The infra-red radiator directs through optical system light on a windscreen surface in such a manner that at dry glass this light is reflected completely. The sensor measures intensity of reflected light.

If glass is covered with water drops, extent of reflection decreases, as infra-red light partially passes through glass. Intensity of reflected light allows to define extent of moistening of a windscreen.

Turning on of the sensor


After ignition key turn in situation 1 or 2 transfer the lever switch to situation 1. There will be a single operation of screen wipers.

You can leave for a long time the lever switch in situation 1, and then to you will be enough after ignition key turn in situation 1
to turn on the sensor of intensity of a rain. For this purpose:

- turn corrugated a castor 6 or
- involve an automatic operating mode of stekloomyvatel.

The corrugated castor 6 will allow you to regulate sensitivity of the sensor according to your wishes.

At journey of jet washers disconnect the sensor as inadvertent operation of screen wipers can lead to their breakage.

2 Work of screen wipers with normal rate


At a stop of the car there is an automatic switching on an interval operating mode (it does not belong to cars with the sensor of intensity of a rain).

3 Work of screen wipers with the increased frequency


At a car stop screen wipers work with normal rate (it does not belong to cars with the sensor of intensity of a rain).

5 Work of stekloomyvatel in an automatic mode


Spraying of a windscreen by washing liquid is accompanied by short-term inclusion of screen wipers.

Short-term impact on the lever switch washing liquid moves on a windscreen, but screen wipers do not join.

Washers фар*


If devices of illumination of the car are switched on, at every fifth operation of washers of a windscreen in an automatic mode there is an automatic washing of headlights.

In order to avoid deterioration of visibility it is necessary to use washers only if freezing of washing liquid on a windscreen is excluded.
Use special nonfreezing liquid.

In order to avoid damage of the pump of stekloomyvatel it cannot be included in the absence of liquid in the tank.

Nozzles of stekloomyvatel


Heating is carried out automatically * if the ignition key is thus in situation 2.