E46 series BMW 3

since 1998 of release

Repair and car operation



E46 series BMW 3
+ BMW 3 Cars (Е46)
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures
   + Leaving and repair of damages of a body
   + External elements of a body
   - Internal elements of a body
      Removal and installation of forward peaks of the dashboard
      Removal and facing installation forward parts of the region of feet
      Removal and installation of the left ware box
      Removal and installation of the right ware box
      Removal and installation of the central console
      Removal and installation of the central armrest
      Removal and installation of a pocket of the console of switches
      Removal and installation of the console of switches
      Removal and installation of the electric motor of a drive of the movable panel of a roof
      Removal and installation of a mirror of an interior
      Interior mirror with automatic blackout
      Removal and installation of lateral facing of a luggage carrier
      Removal and installation of facing of the back panel
      Removal and installation of facing of a trunk lid
      Removal and installation of a head restraint of a forward seat
      Natyazhitel of a seat belt. Main data and security measures
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of nozzles of a stekloomyvatel
      Adjustment of nozzles of a stekloomyvatel
      Removal, installation and check of nozzles of a faroomyvatel
      Removal and installation of levers of a screen wiper
      Removal and installation of the tank/pump of a washer
+ Onboard electric equipment
+ electric equipment Schemes



2d97642e


Removal and installation of the electric motor of a drive of the movable panel of a roof

 REMOVAL

1 Remove a screw-driver a peak. Rasstykuyte I will corrode the drive switch for what open blocking by compression.

2 Turn out screws of fastening by Torx T25 key.

3 Remove the block the electric motor – a reducer and расстыкуйте I will corrode.


 INSTALLATION

4 Establish into place the block the electric motor – a reducer and attach it. Fix it slightly the moment of 3 NChM two short screws-2-and one long - 1-. Surely establish new screws. If it is impossible, grease screws previously with means for fixing of carving connections, for example, Loctite 270.
5 Join the socket of the switch of a drive, establish a cover.

Initialization of the movable panel


6 Establish the movable panel in the provision of lifting and then press the switch of the movable panel further in the direction “Provision of lifting”.
7 Keep the switch 5 with in the provision of lifting after:

- each interruption of a food or
- roof adjustments.

8 Keep the switch 20 with in the provision of lifting after:

- malfunctions in work
- detachments of a drive or
- works with hummock drafts.

9 Initialization is considered finished if the movable panel once again is shortly pressed in the direction “Provision of lifting” (click).