E46 series BMW 3

since 1998 of release

Repair and car operation



E46 series BMW 3
+ BMW 3 Cars (Е46)
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Removal and installation of brake shoes of forward wheels
   Removal and installation directing a forward brake
   Removal and installation of a brake disk of a forward wheel
   Removal and installation of brake shoes of disk brakes
   Removal and installation of a bracket of a brake of back wheels
   Removal and installation of a brake disk of a back wheel
   Measurement of thickness of a brake disk
   Brake liquid - the main data and security measures
   Air removal from brake system
   Replacement of the brake pipeline
   Replacement of a forward brake hose
   Check of the amplifier of a brake
   Removal and installation of blocks of the parking brake
   Adjustment of the parking brake
   Removal and installation of the lever of the parking brake
   Removal and installation of a cable of a drive of the parking brake
   Removal and installation of the switch of a stoplight
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes



2d97642e


Removal and installation of the switch of a stoplight

The switch of a stoplight is located around feet at a support of a pedal of a brake. It represents the contactless electronic switch and practically has no wear.

 REMOVAL

1 Unscrew bolts of fastening and uncover in the left part of the region of an arrangement of feet, address to Removal and facing installation forward parts of the region of feet.

2 Rasstykuytes I will corrode at the switch of a stoplight-1-, for this purpose compress clamps. 2–brake loops. 3–coupling switch.

3 Squeeze out a brake pedal. Pull a pusher-1-and a sleeve-2-completely forward-3-.

4 In this situation remove lock clips-4-and take out the switch back from the holder.


 INSTALLATION

1 Insert the switch with completely extended plug into a support of a pedal and fix.
2 Displace the red lock plug towards the switch so that the fillet of the plug adjoined to a pedal support.
3 Join the socket and fix it.
4 Check, whether the stoplight lights up at the switched-off ignition and the pressed pedal of a brake.
5 Establish into place a cover around an arrangement of feet, address to the Section Removal and facing installation forward parts of the region of feet.