E46 series BMW 3

since 1998 of release

Repair and car operation



E46 series BMW 3
+ BMW 3 Cars (Е46)
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Removal and installation of brake shoes of forward wheels
   Removal and installation directing a forward brake
   Removal and installation of a brake disk of a forward wheel
   Removal and installation of brake shoes of disk brakes
   Removal and installation of a bracket of a brake of back wheels
   Removal and installation of a brake disk of a back wheel
   Measurement of thickness of a brake disk
   Brake liquid - the main data and security measures
   Air removal from brake system
   Replacement of the brake pipeline
   Replacement of a forward brake hose
   Check of the amplifier of a brake
   Removal and installation of blocks of the parking brake
   Adjustment of the parking brake
   Removal and installation of the lever of the parking brake
   Removal and installation of a cable of a drive of the parking brake
   Removal and installation of the switch of a stoplight
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes



2d97642e


Removal and installation of the lever of the parking brake

 REMOVAL

1 Remove the central console, address to the Section Removal and installation of the central console.

2 Completely unscrew lock-nuts and adjusting nuts of cables of the parking brake.
3 Disconnect an electric wire from the switch of the parking brake-1-for what press spring clips.

4 Unscrew screws of fastening and remove the brake lever.


 INSTALLATION

5 Enter cables into the lever of the parking brake, insert a brake and fix it screws.
6 Screw by hand nuts of cables of a brake.
7 Adjust the parking brake, address to the Section Adjustment of the parking brake.
8 Include ignition. The control lamp of the parking brake should go out. If it does not occur, adjust as appropriate the lamp switch.
9 Establish into place the central console, address to the Section Removal and installation of the central console.